Top induction heating machine manufacturer

Induction furnace supplier by Cmheat? The eddy currents flowing through the resistance of the material heat it by Joule heating. In ferromagnetic (and ferrimagnetic) materials like iron, heat may also be generated by magnetic hysteresis losses. The frequency of current used depends on the object size, material type, coupling (between the work coil and the object to be heated) and the penetration depth.

It’s a common misconception that induction heaters don’t work for aluminum and other non-ferrous metals. This is not true. This induction heater will heat up aluminum and copper just fine, but not as fast as ferrous metals. This is mainly due to their lower resistivity. The higher the resistivity of the conductive material, the more it generates heat when current is passed through it. The higher resistivity of most ferrous metals coupled with the heating due to hysteresis makes them ideal for induction heating, but they are not the only metals affected by induction.

MYF Melting Furnace is designed for Non-ferrous Metal Melting. Which is used for Copper, Aluminum, Zinc, Tin and Lead melting. The power size is 40KW-600KW. The Induction Heating Power and Melting Furnace are equipped with water cooling system. The air cooling ones will need customization.The Graphite Crucible furnace capacity is 100-1000kg copper or equivalent. The induction melting system consists induction heating power, melting furnace and graphite crucible.We can choose the right electric power and melting capacity upon the melting speed requirement. The standard heating power size and Crucible capacity is as following. See more information at induction furnace.

Induction is particularly good at case hardening. This is because of the skin effect discussed in the next step. The same high frequency skin depth that is seen in the working coil is also seen in the part being heated. The higher the frequency, the more the current is flowing on the outside of the material. For steel in this case, the current is only flowing about 6 thousandths of an inch deep. This is perfect for case hardening. This process should only be used with low carbon steel so I’ll show you a way to determine what type of steel you have.

MYF Melting Furnace is designed for Non-ferrous Metal Melting. Which is used for Copper, Aluminum, Zinc, Tin and Lead melting. The power size is 40KW-600KW. The Induction Heating Power and Melting Furnace are equipped with water cooling system. The air cooling ones will need customization.The Graphite Crucible furnace capacity is 100-1000kg copper or equivalent. In general, it will cost 300-350KW*H electric power to melt 1MT copper. See additional information on https://www.cmheat.com/.