Chemical resistant hand protection work gloves online shops right now

Chemical resistant hand protection work gloves online shop with excia.asia: The risk of exposure to hazardous materials and poor-quality protective wear can limit the productivity and safety of workers. Hazardous Chemicals, Liquids, and Oil: Dealing with machines usually in contact with black oils, lubricants, aerosol Spray, gear oil, and chemicals liquids. Rough and Sharp-Edged Objects: Exposed to risks of injuries due to handling machinery works. Hand Fatigue: Long hours of working can cause discomfort in hands especially handling heavy machines or objects. The excellent grip performance of our gloves allows less force required to handle machine parts or objects, thus increasing work efficiency. Read extra information at chemical resistant work gloves.

S-TEX: Also known as the Hagane Coil® technology, this engineered liner was originally developed for the S-TEX KV3, providing high levels of cut resistance without sacrificing comfort. It utilises a unique coiling technique that binds an attending yarn to a stainless steel core, which provides better protection than any natural or synthetic fibres, yet it is thin enough to allow flexibility and free movement as the hand bends and flexes.

Natural cellulose fibre. Flexible, soft and non-irritating, it protects against mechanical aggression (impacts, low vibration, iron filings, splinters, glass fragments), absorbs perspiration and gives you great comfort when wearing dipped protective gloves continuously. Cotton fibres are mixed with polyester fibres in order to associate comfort with a higher mechanical resistance and more elasticity. Nylon: A lightweight elastic polyamide which is largely lint-free and washable, dries quickly and is resistant to abrasion and deformation. Mixed with cotton and acrylic, it makes the glove more flexible and extends its lifetime.

For protective gloves claiming impact resistance. Measures dissipation of force by the area of protection upon an impact of a domed anvil at an impact energy of 5 joules. Testing is carried out in accordance with the impact protection test for motorcycle protective gloves of EN 13594:2015 standard. A letter “P” is added on successful pass, while a fail remains unmarked. Level X can also be applied for a – f above, which means “not tested”. EN 511:2011 : This standard applies to any gloves to protect the hands against convective and contact cold down to -50ºC.

Breathex Foam: This dual-latex coating technology allows gloves to be both breathable and liquid resistant, providing premium grip and dexterity with breathability in dry or wet environments, no matter the outdoor conditions. How It Works: Aerated latex foam covers 13 gauge liner to allow warm air to escape, so your hands can breathe and perspiration is reduced. Full foam latex coating is impermeable, preventing liquid from penetrating the glove and therefore keeping your hands dry. Extra latex coating on palm and fingers provides excellent grip and dexterity.

Degradation is the deleterious change in one or more properties of a protective glove material due to contact with a chemical. Indications of degradation can be delaminating, discoloration, hardening, softening, dimensional change, loss of tensile strength, etc. It is determined by measuring the percentage change in puncture resistance of the glove material after a continuous contact for 1 hour of the external surface with the challenge test chemical. The results of the degradation test must appear in the information leafet for all three glove types. See extra info at excia.asia.