Custom alloys wholesale provider today

Quality gravity cast wheels factory: Revolutionize Your Ride: Expert Wheel Installation Tips! During the wheel installation process, the following points need to be noted: Select the right wheel: Before installation, make sure the wheel selected matches the vehicle model and specifications. Different vehicle models may have different wheel sizes, number of bolt holes and offset requirements. Improperly fitted wheels may cause installation problems or affect driving performance. CLEAN WHEELS AND MOUNTING SURFACES: Thoroughly clean the wheels and mounting surfaces before installing the wheels. Use a cleaner or high-pressure water gun to remove dirt and grease from the surface to ensure the wheel is securely mounted. See more information at casting wheel manufacturer.

The two piece wheel consists of two parts: the rim (Barrel), and the wheel width. It is possible to combine different rim widths and thicknesses on one hub, or to combine widths and offsets for more options. And the two spokes are interchangeable, so that when repairing and replacing, it is not necessary to replace the whole hub, but only the part, which is finally fastened with high-strength bolts. This is the most primitive processing method for aluminum alloy wheels, which can be formed by pouring high-temperature liquid metal into the mold and cooling it. This method is efficient and low cost, but the uniformity of each part of the manufactured wheel is poor, and the molecular density is relatively low, resulting in low strength, so it is not very suitable for high-strength use of passenger vehicles.

Pure electric vehicles are driven by electric motors. Unlike fuel vehicles, the engine combustion is not only loud, but also vibrates greatly. When pure electric vehicles are driving, there is no obvious shaking, and the front of the car does not need an air intake grille. Very quiet in the car. Of course, to drive a pure electric car, you need to master the switch. Many people are prone to motion sickness. Many people are used to driving a fuel car. When you start off with a kick of the switch, the power comes fast, the linearity is very strong, the speed is fast, and the back feeling is full. When braking, the switch is closed, and the power recovery function is added, and the power is lost instantly, and the head-up and nodding movements are more obvious.

Low-pressure casting: It is more advanced compared to gravity casting. Although it is also formed by pouring high-temperature liquid metal into the mold and cooling it, the metal molecular density will be higher with the help of constant pressure and the wheel will have higher strength after forming because of the use of low-pressure nitrogen propulsion to accelerate the filling of the mold. The whole process is mechanized, so the level of craftsmanship is stable. This process is usually used for most of the original matching wheels for vehicles today.Jiangjin Wheel is a professional aluminum alloy wheels suppliers,specialized in low pressure casting wheels.

Jiangjin alloy wheel manufacturers provide one-stop service starting from customizing R&D services, according to your drawings and samples to meet your special requirements, especially with our Flow Formed, automated coating line, helium leak detector system and automatic dynamic balance checking system. Customer care is our top priority job to provide all customers’ satisfaction and trust what we work for. We believe that superior customer satisfaction comes from superior product quality.

One is size: don’t blindly increase the hub. Some people increase the wheel hub to improve the performance of the car. Under the condition that the outer diameter of the tire remains unchanged, the large wheel hub is bound to match the wide and flat tire. The lateral swing of the car is small, and the stability is improved. pass by. However, the flatter the tire, the thinner the thickness, the worse the shock absorption performance, and the greater the sacrifice in terms of comfort. In addition, the tires are easily damaged if there are some roadblocks such as stones. Therefore, the cost of blindly increasing the hub cannot be ignored. Generally speaking, it is most appropriate to increase one or two sizes according to the size of the original wheel hub.

Mistake : the larger the size of the wheel, the better. Many people modify the original intention of the hub is actually simple and rough: good look! The wheel size is larger, the vehicle effect looks bigger, more powerful. To be frank, it’s even higher! But blindly increase the size of the wheel hub,calipers, baffle, suspension system is easy to hit, even lead to heavy damage the vehicle suspension system and increase fuel consumption. General conventional wheel hub modification or upgrade to a maximum of 2 inches is appropriate, but also pay attention to the collocation of tire specifications, tire diameter change <3%. Otherwise it will affect the accuracy of the code table, even may receive a lot of tickets for no reason. Find more details on https://www.jjjwheel.com/.

The Flow-Forming Process: A Quick Overview: The flow-forming process is a manufacturing technology used to produce high-performance wheels. Using heat and pressure, the inner barrel of a cast wheel is stretched and compressed, enhancing its tensile strength and durability. Flow-formed wheels are an ideal option for car enthusiasts who want the style and strength of forged wheels but do not have the budget for them. With a combination of superb design options and affordability, flow-formed wheels offer an exceptional solution for performance enthusiasts. Additionally, their elongation characteristics and superior shock resistance make them a superior choice over traditional cast wheels. In sum, the flow-forming process is changing the game in the wheel industry as we know it.