V-hold Machinery provider by V-hold Machinery

Quality woodworking machines manufacturer and supplier: Professional woodworking machinery is designed purposefully to ensure users get a variety of desired outcomes. We also followed the same strategy to come up with the best products manufactured by V-Hold. We assessed all the products carefully so you will have to look any further or face any unforeseen issues. Reviewed products carry features that you should have whatever product you are choosing. V-Hold is an experienced manufacturer with decades of experience in the field. Their adherence to safety and quality standards are the glimpses you are likely to buy product needs and preferences accordingly. This blog is an effort to help you reach an informed decision. Hope you will get the assistance from these products you need so you make an informed decision. In case of any queries or anything about the product you need to know, use email, phone, WhatsApp, etc. modes to get the necessary information. Find more info on v-hold machinery.

Up-acting machines typically apply hydraulic pressure from the centre of the lower beam which pushes the lower beam upwards into a fixed upper beam. Tonnage is applied to the centre of the lower beam in an upward fashion. The flex in the bend tends to be even from left to right. Hydraulics are used to push the lower beam up and gravity is used to return the lower beam down. A loss in power will result in the brake being in the open position. Since the lower beam does move during operation, feedback to the operator is given. Knowing the lower beam is moving can be a safety feature. Down-acting machines are preferred if staged bending is important. Staged bending is a valuable option that can significantly improve productivity while minimising setup time.

The wood is fixed between the headstock and tailstock of the lathe. The headstock houses the motor that spins the work-piece. The tailstock is adjustable, moving along the length of the bed to fit work-pieces of various lengths. Once the work-piece is locked in place, the tool rest is set into position. The spinning work-piece is then shaped using a chisel or gouge held fast to the tool rest. Face-plate turning, in with the work-piece is fastened with screws to the face plate of the drive spindle, allows the woodworker to produce bowls and other hollow goods.

Table and Belt Sander: The stationary belt sander uses a closed loop of paper that travels at speed around a pair of cylindrical drums. One drum is driven by an electric motor, the other is spring-loaded to maintain belt tension. Powered by the same motor, the stationery disk sander uses sanding disks that spin on a backing plate. On both the belt and disk sanders the work-piece is presented to the tool (the opposite is true of portable belt and hand held disk sanders which are presented to the work) on stationary sanders, an adjustable worktable or fence can be fixed in front of the sander to position the work-piece during sanding. Re-saws are a type of band saw specifically designed to cut large sections of timber into smaller sections. Some re-saws can also be used to cut thick veneers making them a popular choice for the manufacturer of engineered wood flooring. See even more info at https://www.v-holdmachinery.com/.

A jointer is used for planing straight edges and surfaces of boards. In practice, it performs the work of a hand planer and is capable of producing a true surface with sufficient accuracy and speed. In consists of a frame, table, feed rollers, revolving head fitted with two or three cutter knives. With the help of feed rolls, the plank is fed to the cutter head which removes the wooden chips as the board advances and makes its surface smooth and plane. By means of an adjustable fence, the jointer can also be used for angular and level cuts. A jointer is specified by the length of the cutting blade.

Presses come in various sizes and with various powers/pressures. The presses can be easily adapted to fit a businesses personal requirements. Automated press lines are designed in conjunction with all through-feed press options to be fully automatic or semi-automatic. They can start at the brushing stage where the material is cleaned, through to gluing, pressing then cutting. Modern presses fall into two categories: down-acting and up-acting. A down-acting machine has an upper beam that moves downwards to bring the tooling together. An up-acting machine has a lower beam that moves upwards to do the same. Each machine has its own strengths and limitations.

The band is available in two models, vertical and horizontal. In the former, two wheels are arranged side by side and the table is mounted underneath. In the latter model, Frame illustrated in Fig. 10.55, the wheels are arranged one above the other in a vertical plane below the table and the band passes through the table. As in the case of the circular table, angular cuts are obtained by tilting the saw table. The size of the band saw is specified as the distance from the saw band to the inner side of the frame. The distance is roughly equal to the diameter of the wheels.

Founded in 1996, V-HOLD have more than 20 years of professional four-sided plane production, to create China’s four-sided plane first brand and commits itself to provide the most secure, reliable, efficient, energy-saving, economical production equipment for the customers around the world. Nowadays, most of the products including 4-Side Moulder, Multiple Rip Saw, Multiple Rip Saw with Double Side Planner, and Automotive Floor Production Line have passed ISO9001: 2000 quality system.